Connecting A Dvi Device; Connecting An Hdmi Device; Selecting The Pc/Hdmi 3 Audio Mode - Toshiba 47VL800A Owner's Manual

Connecting a HDMI audio system
One HDMI cable (type A connector) is needed�
AV amplifier corresponding to ARC
Back of TV
HDMI's ARC (Audio Return Channel) feature
This feature enables the audio signal of the TV to be sent
to the AV amplifier via the HDMI cable. It will not be
necessary to connect a cable from the audio output of the
TV to the audio input of the AV amplifier to reproduce the
audio received from the tuner of the TV through the AV
amplifier.

Connecting an HDMI device

One HDMI cable (type A connector) is needed�
Back and left side of TV
HDMI device
VIDEO AUDIO
L
For proper operation, it is recommended that you use a
short HDMI cable�
HDMI cable transfers both video and audio�
Connecting your TV
R
IN
HDMI OUT
OUT
Note:
It is possible that some HDMI devices may not
operate properly with this TV.

Connecting a DVI device

One HDMI (type A connector) -to-DVI adapter cable and
analogue audio cables are needed�
The audio terminals are shared with o RGB/PC�
DVI device
VIDEO AUDIO
L R
HDMI (type A connector)-to-DVI adapter cable
For proper operation, the length of an HDMI-to-DVI
adapter cable should not exceed 3m� The recommended
length is 2m�
Standard analogue audio cables
An HDMI-to-DVI adapter cable transfers only video�
Separate analogue audio cables are required�

Selecting the PC/HDMI 3 audio mode

You can select PC audio or HDMI 3 audio when using this
function�
1
From the Preferences menu, press s or r until
AV Connection is selected�
Preferences
Network Lock
Panel Lock
Display Settings
AV Connection
Energy Saving Settings
Blue Screen
Clock Display
HDMI Information Display
2
Press OK to display the AV Connection menu�
Back and left side of TV
RGB/PC
(AUDIO)
HDMI 3
DVI
OUT
IN
OUT
Off
Off
On
Off
Off
49