Sound Adjustment - Toshiba 47VL800A Owner's Manual

1
From the Picture menu, press s or r until Control
Visualization is selected and press OK � The
histogram window will appear�
Control Visualization
Number
Of
Pixels
Output
2
Press BACK to return to the previous menu�
Using Auto Format
When the TV receives a true HDMI signal picture and
Auto Format is On, the picture will automatically be
displayed in HDMI signal format, irrespective of the TV's
previous setting� When in Digital TV mode, the display
format will follow the broadcasted format�
1
From the Preferences menu, press
Display Settings is select�
2
Press OK and press s or r to select Auto Format
3
Press v or w to select On or Off �

Sound adjustment

Selecting Dual 1 or Dual 2 mode
You can hear only Dual 1 or Dual 2 sound, when bilingual
programmes are received�
1
From the Sound menu, press s or r to select Dual �
Sound
Dual
Balance
Advanced Sound Settings
Dolby Volume
Dynamic Range Control
Audio Level Offset
Headphone Settings
2
Press v or w to select Dual 1 or Dual 2 �
Note:
• The Dual menu setting status is stored even when
the TV is turned off.
28
Using the TV's features (General)
Distribution
Brightness
Control Curve
Input
or
Dual 1
0
Low
Off
Stereo and Bilingual transmissions
For ATV programmes
If stereo or dual language broadcasts are transmitted, the
word Stereo or Dual will appear on the screen each time
positions are changed, disappearing after a few seconds� If
the broadcast is not in stereo, the word Mono will appear�
Stereo ... Press
Bilingual ... Bilingual transmissions are rare� If they
are transmitted, the word Dual will display� Choose the
desired channel number, and if the word Dual appears,
press
or Dual 1 or Dual 2 (German stereo/bilingual broadcast)�
For DTV programmes
For stereo or dual mono broadcasts, press
v or w to select settings�
Mode Display
d Stereo
j Dual mono
e Mono
Surround
Adjusting the sound Balance
until
1
From the Sound menu, press s or r to select the
Balance �
2
Press v or w to adjust the settings as desired�
Adjusting the Sound Navigation
You can customize the sound mode settings. Select the
appropriate mode in accordance with the installation
location of the TV ( Stand or Wall ) and adjust the
equalizer on-screen as desired�
1
From the Sound menu, press s or r to select
Advanced Sound Settings and press OK �
2
Press s or r to select Sound Navigation and
press OK �
Advanced Sound Settings
Sound Navigation
Surround
Voice Enhancement
Dynamic Bass Boost
3
Press v or w to select Stand or Wall depending on
how your TV is installed and press the RED button�
4
Press v or w to select the frequency range you want
to adjust from the equalizer window and press s or
r to adjust the level�
to select Stereo or Mono �
to select Dual 1 , Dual 2 , Mono (NICAM)
Pressing w
Stereo S Left S Right
Dual 1 S Dual 2 S Dual
—
—
and use
Off
On
High