Speakers; Device Control - Toshiba 47VL800A Owner's Manual

if TV Speakers has been selected. Turn the TV to
standby and on again to output the sound from the
TV speakers.
• The above functions are dependent on the
connected device and TV setting.
Position Key Pass Through
When Position Key Pass Through for the selected
HDMI input mode is set to On , the P U , P u and number
(0-9) keys on the remote control will pass through� When
in Off , those operate as TV programme selection keys�
REGZA-LINK one touch play
When a connected device is switched on, REGZA-LINK
will automatically switch the TV to the appropriate HDMI
input� Also, if the TV is in standby, it will be switched on
automatically�
These functions can be enabled or disabled from the
REGZA-LINK Setup �
Note:
Even if the device is only showing a menu, the TV
may automatically switch to that input source.
REGZA-LINK system standby
This feature automatically puts the connected device into
standby when the TV goes into standby and vice versa�
REGZA-LINK system audio control
Using the Speaker Preference feature allows the TV
remote control to adjust the volume or mute the sound of
the speakers connected to the TV via an AV amplifier.
Ensure that the connected AV amplifier and REGZA-
LINK device are selected in the input source selection
and that Initial Speaker Setting is set to Amplifier in
the REGZA-LINK Setup menu or in the Quick Menu
( Speakers )�
Notes:
• The above functions are dependent on the
connected device and TV setting.
• When you turn on the AV amplifier, change its input
source, or adjust the sound volume, the sound will
be output from the AV amplifier's speakers even if
TV Speakers has been selected for Initial Speaker
Setting. Turn the TV first to standby and on again
to output the sound from the TV speakers.
• The proper function may not work when operating
the AV amplifier.
REGZA-LINK input source selection
When devices that use CEC technology have been
connected, the REGZA-LINK icon will be displayed in
the input source list�
Using the TV's features (General)
To select the REGZA-LINK input source, refer to
"Selecting the video input source" on page 37�
Notes:
• This function depends on the devices connected.
• If you select the REGZA-LINK input source from the
• When the TV is switched on, it will take a few
• If the HDMI cable from a connected device or an
REGZA-LINK Device Control
With the REGZA-LINK mode on your television's remote
control, you can control the connected REGZA-LINK
device you are watching�
To control the REGZA-LINK input source first select the
equipment by REGZA-LINK input source selection�
1
2
3
Note:
The available functions depend on the equipment
connected. Please refer to the operation manual for
each piece of equipment connected.
The TV features that can be controlled by the
connected device remote control are:
Volume, Sound mute, Input selection, Previous menu ( -
page 12)�
Inputs
TV
1
2
3
HDMI 1
HDMI 2
HDMI 3
HDMI 4
PC
popup window, some REGZA-LINK devices may
automatically turn on.
minutes for the REGZA-LINK icon to appear in the
list; when an HDMI cable is removed, it will take a
few minutes for the icon to disappear.
HDMI setting for a connected device is changed,
Enable REGZA-LINK in the REGZA-LINK Setup
menu may need to be reset to On.
Press QUICK to open the Quick Menu �
Press s or r to select REGZA-LINK Device
Control and press OK �
REGZA-LINK Device Control
Recorder
Root Menu
Contents Menu
Setup Menu
Top Menu
DVD Menu
Press s or r to select a control option and press OK �
REGZA-LINK
Power Eject
Audio
39