Gateway 450Sx4 Service Manual page 51

Replacing Gateway 450SX4 Components
11
Insert the small flat-blade screwdriver or non-marring tool under the left
side of the indicator panel and gently pry it up about ¼ inch, then lift the
entire panel from the notebook.
12
Align the new indicator panel's screw holes with the holes on your
notebook, then press the panel into place.
13
Carefully replace the indicator panel's shielding.
14
Replace the three screws that secure the LED indicator panel to your
notebook.
15
Rethread the antenna cables (if applicable).
16
Reassemble your notebook.
46 www.gateway.com