Pioneer DV-444-K Operating Instructions Manual page 19

Setting digital audio connections
to an AV amplifier or decoder
The [Digital Jack] screen establishes whether digital
connections have been made to an AV amplifier,
receiver, or external decoder. As there are numerous
options available, please refer to the instructions
supplied with the component the player is connected to
determine what digital audio formats can be decoded.
If you have made no digital connections, select [Not
Connected].
Audio1 V2 Language
A2 Video1
Setup Navigator
Amp Connection
Digital Jack
Compatible with Dolby Digital
Move
Settings: Dolby Digital*
Dolby Digital/DTS
Dolby Digital/MPEG
Dolby D/DTS/MPEG
PCM
Not Connected
Setting compatibility with 96 kHz
output
The [96 kHz PCM Audio] screen establishes whether
or not the AV component the player is connected to is
capable of processing an audio signal with a sampling
rate of 96 kHz. This screen only appears if connections
have been made to an external AV component as
determined in previous screens.
Audio1 V2 Language
A2 Video1
Setup Navigator
Amp Connection
96kHz PCM Audio
Digital jack not compatible with 96kHz
Move
Settings: No*
Select if the connected AV component
cannot process an audio signal with a
sampling rate of 96 kHz.
Yes
Select if the connected AV component can
process an audio signal with a sampling
rate of 96 kHz.
Don't Know
Select if you are uncertain whether the
connected AV component can process an
audio signal with a sampling rate of 96 kHz.
General
Dolby Digital
Dolby Digital/DTS
Dolby Digital/MPEG
Dolby D/DTS/MPEG
PCM
Not Connected
SETUP Exit
ENTER Select
*Factory setting
General
No
Yes
Don't Know
Select Exit
ENTER SETUP
*Factory setting
Confirming the settings
The [Exit Setup Navigator] is the final screen in the
Setup Navigator.
Audio1 A2 Video1 V2 Language
Setup Navigator
Exit Setup Navigator
Changes are saved
Move
Settings: Save Changes*
Select to have the player make all of the
necessary audio, video and language
settings according to your responses in the
Setup Navigator.
Delete Changes
Select to exit the Setup Navigator without
changing any of the system settings.
Start Again
Select to return to the [OSD Language]
screen of the Setup Navigator and do the
settings again.
To change other player settings in the Setup
screen menus
The procedure for changing the settings in the Setup
screen menus is described on page 22.
General
Save Changes
Delete Changes
Start Again
Select Exit
ENTER SETUP
*Factory setting
17
En