Table of Contents
Advertisement
Maintenance
Scanning glass and rollers
Clean the scanning glass and rollers frequently to ensure the quality of
transmitted images and copies. Open the operation panel (grasp the
finger hold and pull up), and wipe the scanning glass and rollers with
a soft cloth.
♦
Make sure that all dirt and stains (such as correcting fluid) are
removed, as dirt and stains will cause vertical lines on transmitted
images and copies.
♦
Adhesive cellophane tape is useful for removal of debris from the
rollers.
Document
rollers
Caution: When wiping, take care not to damage any of the protruding parts
on the underside of the operation panel.
The housing
Wipe the external parts and surface of the machine with a dry cloth.
Caution!
• • • •
Do not use benzene or thinner. These solvents may damage or discolour the
machine.
106
Scanning glass
Advertisement
Table of Contents
