Operational Faults; Diagnostics And Troubleshooting - Invacare Auriga Service Manual

Auriga
Invacare
®
6

Operational faults

6.1

Diagnostics and troubleshooting

The electronic system provides diagnostic information to help service personnel to locate and correct faults in
the system. When a fault occurs the status display will fl ash in bursts, followed by a pause, then fl ash again.
The type of fault that has occurred is indicated by the number of fl ashes, which also called a fl ash code.
Depending on the severity of the fault, and its effect on the safety of the user, the electronic system can react
in several different ways. For example it can:
•
simply display the fl ash code as a warning, and allow normal operation to continue
•
display the fl ash code, and immobilise the scooter until the system is turned off and back on again
•
display the fl ash code, immobilise the scooter, and prevent further operation of the scooter until the
fault is corrected.
If an error occurs, please proceed as follows:
•
Check the troubleshooting guide in chapter 7.
•
Check the status display on the control panel, and compare any fl ash codes with the troubleshooting
guide in chapter 7.
•
Perform any checks and repairs that are necessary.
Page 12
Service Manual