Using Smile Catch; Smart Scene; Blink Detector - BenQ C1020 User Manual

3.7.15 Using Smile Catch

Smile Catch automatically captures the moment of a smile of your subject.
1. In the capture mode, press
2. The camera is tracking the face of your subject (a white frame shows).
3. Press the shutter to activate smile tracking, and then release the shutter immediately. The
camera now is tracking the smile of your subject (a green frame shows).
4. Once a smile is detected, the camera instantly takes a picture.
5. The camera continues to detect smiles and takes more pictures (Step 4 is repeated). To
stop the smile tracking at anytime, press the shutter.
• The camera will also automatically stop smile tracking if your subject leaves your
composition area.
• Face tracking (one face only) is always on in the Smile Catch mode.

3.7.16 Smart Scene

Smart Scene automatically selects the best shooting mode from Backlight
, Macro
1. In the capture mode, press
2. Press the shutter halfway to set automatic focus. The selected shooting mode is displayed
in the top left corner of the screen.
3. Press the shutter to capture an image.
• If the current environment does not fit into one of the above 5 shooting modes, Smart
Scene will automatically switch to its default value.

3.7.17 Blink Detector

Blink Detector automatically detects blinking when you capture an image.
1. In the capture mode, press
2. Press the shutter to capture an image. If blinking is detected, a warning message appears
on the screen.
3. Press [ ] / [
20 Using the Camera
and select
, Portrait , and Night Scene
and select
and select
] to save or discard the image, and then press [
.
.
.
.
] or
, Landscape
to confirm.