Location 247 Programming The Opening Time For Schedule 1; Location 248 Programming The Closing Time For Schedule 1; Location 249 Programming The Days For Schedule 1; Locations 250 - 270 Programming The Schedules 2 - 8 - Interlogix NetworX NX-1700E Installation And Startup Manual

LED3 -
"On" if the door is not to be latched unlocked during an open schedule.
LED4 -
"On" if onboard open collector output only triggers during an open schedule.
LED5 -
"On" if onboard open collector output only triggers during a close schedule.
LED6 -
"On" if Forced Entry Alarm is logged.
LED7 -
"On" if access allowed without an RTE. (Default is "On")
LED8 -
"On if relay operates normally during off-schedule (outside of regular operating hours).
Segment 2 Enabling the Schedules for the Onboard Open Collector Output:
LED1 -
"On" if driver follows Schedule 1.
LED2 -
"On" if driver follows Schedule 2.
LED3 -
"On" if driver follows Schedule 3.
LED4 -
"On" if driver follows Schedule 4.
LED5 -
"On" if driver follows Schedule 5.
LED6 -
"On" if driver follows Schedule 6.
LED7 -
"On" if driver follows Schedule 7.
LED8 -
"On" if driver follows Schedule 8.
Segment 3 More Door Options
LED1 -
"On" if egress input is to be disabled.
LED2-8
Reserved
L 247
OCATION
(2 segments of numerical data)
Segment 1 Program the hour of the opening time in 24-hour format. (Default is 8 = 8:00 AM)
Segment 2 Program the minutes after the hour of the opening time for Schedule 1. (Default is 0)
L 248
OCATION
(2 segments of numerical data)
Segment 1 Program the hour of the closing time in 24-hour format. (Default is 20 = 8:00 PM)
Segment 2 Program the minutes after the hour of the closing time for Schedule 1. (Default is 0)
L 249
OCATION
(1 segment of binary data)
LED1 -
"On" if schedule is active on Sunday.
LED2 -
"On" if schedule is active on Monday.
LED3 -
"On" if schedule is active on Tuesday.
LED4 -
"On" if schedule is active on Wednesday.
LED5 -
"On" if schedule is active on Thursday.
LED6 -
"On" if schedule is active on Friday.
LED7 -
"On" if schedule is active on Saturday.
LED8 -
"On" if schedule is disabled on holidays.
L 250 - 270
OCATIONS
Locations 250 - 270 are used to program the opening times, closing times, and days for Schedules 2 - 8. Each schedule has three
locations that are programmed with the same steps as Schedule 1 described previously. Refer to Schedule 1 (Locations 247 - 249
above) for specific instructions.
Location 250 – Opening Time for Schedule 2
Location 251 – Closing Time for Schedule 2
Location 252 – Days for Schedule 2
Location 253 – Opening Time for Schedule 3
Location 254 – Closing Time for Schedule 3
Location 255 – Days for Schedule 3
Location 256 – Opening Time for Schedule 4
Location 257 – Closing Time for Schedule 4
Location 258 – Days for Schedule 4
Location 259 – Opening Time for Schedule 5
Location 260 – Closing Time for Schedule 5
Location 261 – Days for Schedule 5
10
P O
ROGRAMMING THE
P C
ROGRAMMING THE
P D
ROGRAMMING THE
P
ROGRAMMING THE
T S
PENING IME FOR CHEDULE
T S
LOSING IME FOR CHEDULE
S 1
AYS FOR CHEDULE
S 2 - 8
CHEDULES
Location 262 – Opening Time for Schedule 6
Location 263 – Closing Time for Schedule 6
Location 264 – Days for Schedule 6
Location 265 – Opening Time for Schedule 7
Location 266 – Closing Time for Schedule 7
Location 267 – Days for Schedule 7
Location 268 – Opening Time for Schedule 8
Location 269 – Closing Time for Schedule 8
Location 270 – Days for Schedule 8
1
1
NX-1700E Card Reader