Three Year Limited Warranty - DeWalt DW367-XE Instruction Manual

Hardened gum on the blade can be removed with kerosene, turpentine, or oven cleaner. Anti-stick coated blades
can be used in applications where excessive build-up is encountered, such as pressure treated and green lumber.
ACCESSORIES
Recommended accessories for use with your tool are available at extra cost from your local service center.
CAUTION: The use of any non-recommended accessory may be hazardous.
DO NOT USE WATER FEED ATTACHMENTS WITH THIS SAW.
VISUALLY EXAMINE CARBIDE BLADES BEFORE USE. REPLACE IF DAMAGED.
Recommended Blade Types
DW3173A
DW3176A
If you need any assistance in locating any accessory, please contact D
Mooroolbark, VIC 3138 Australia or call 1800 654 155 or (NZ) 09 526 2556.
Guarantee
Applicable to hand held Power Tools, Lasers and Nailers.

Three Year Limited Warranty

D WALT will repair, without charge, any defects due to faulty materials or workmanship for three years from the
E
date of purchase. Please return the complete unit, transportation prepaid, to any D
authorised service station.
For warranty repair information, call (AUS) 1800 654 155 or (NZ) 09 526 2556.
This warranty does not apply to
• Accessories
• Damage caused where repairs have been made or attempted by others.
• Damage due to misuse, neglect, wear and tear, alteration or modification.
This warranty gives you specific legal rights and you may have other rights under the provisions of the Consumer
Guarantee Act 1993 (New Zealand only), Trade Practices Act 1974 and State Legislation (Australia only).
In addition to the warranty, D WALT tools are covered by our:
E
FREE ONE YEAR SERVICE CONTRACT
D WALT will also maintain the tool for free at any time during the first year of purchase. This includes labour, parts
E
and lubrication required to restore the product to sound mechanical and/or electrical condition. Normal wear parts
are not covered in this service. Carbon brushes worn more then 50% will be replaced.
NOTE: Three Year Warranty is not applicable to items deemed as consumables. Radial arm saws are covered by
a one (1) year warranty only. D WALT Reserves the right to review its warranty policy prior to launch of any new
E
business development products.
30 DAY NO SATISFACTION GUARANTEE
If you are dissatisfied with any D WALT power tool, laser or nailer, for any reason, simply return it to the point of
E
purchase with your sales receipt within 30 days for a replacement unit or a full refund.
FREE WARNING LABEL REPLACEMENT: If your warning labels become illegible or are missing, call (AUS) 1800
654 155 or (NZ) 09 526 2556 for a free replacement.
184 mm 20/16 mm 20 teeth
184 mm 20/16 mm 36 teeth
WALT Industrial Tool Co., 20 Fletcher Road,
E
WALT Service Centre, or any
E
DW367-XE
Volts 230 V AC ~
Frequency 50 Hz
Watts: 1600 W
RPM: 5800/min
Blade Diameter: 184 mm (7-1/4")
6
Tool Specifications
DW368-XE, DW369-XE
230 V AC ~
50 Hz
1800 W
5800/min
184 mm (7-1/4")