EPSON Stylus C87/C88/D88
4.3.3 Disassembling Printer Mechanism
4.3.3.1 Printer Mechanism
Follow the following steps to bring out the Printer Mechanism.
1)
Remove the ASF Unit. (p48)
2)
Remove the Main Board. (p57)
3)
Remove the Panel Board. (p60)
4)
Remove the PS Board. (p61)
5)
Remove the Housing, Lower Assy.. (p51)
DISASSEMBLY/ASSEMBLY
4.3.3.2 Holder Shaft Unit
1)
Remove the Panel Board. (p60)
2) Move the CR Unit to the left side of the printer.
3) Disconnect the two connectors from the Main Board.
Main Board Step 3)
CN7: CR Encoder FFC
CN8: Head FFC
4) Release both the CR Encoder FFC and the Head FFC from the tab of the
Holder Shaft Unit.
Figure 4-45. Removing Holder Shaft Unit (1)
Dissasembly Procedures
Figure 4-44. Moving CR Unit
CR Encoder FFC
Head FFC
Tab
Holder Shaft Unit
Revision A
(See 4.3.2.1 Removing
62