Removing Housings - Epson Stylus C87 Service Manual

EPSON Stylus C87/C88/D88

4.3.1 Removing Housings

Do not damage the tabs in removing the Housings.
C A U T I O N
Do not tilt the printer too much when removing the Housings
because ink may flow if the Carriage unit is not at the home
position.
4.3.1.1 Housing, Left
1) Insert a ruler or a similar tool to the notch on the bottom of the main unit to
release the tab of the I/F cover, and remove the I/F cover.
Bottom
Convex Portion
Housing, Right
Notch
Tab and Stopper
Inside
I/F Cover
Figure 4-3. Removing Housing, Left (1)
DISASSEMBLY/ASSEMBLY
2) Insert a flathead driver or a similar tool to the notch on the backside of the
Tab
Notch
Dissasembly Procedures
main unit, and release the tab.
Backside
Figure 4-4. Removing Housing, Left (2)
Revision A
Tab and Notch
44