EPSON Stylus C87/C88/D88
4.3.2 Removing Boards
4.3.2.1 Main Board
1)
Remove the ASF Unit. (p48)
2) Remove the Clump Core from the Main Unit.
Figure 4-34. Removing Clump Core
DISASSEMBLY/ASSEMBLY
Clump Core
3) Disconnect all the connectors from the Main Board.
CN2: Power Supply Cable
CN4: Panel Board Connector
CN5: CR Motor Connector
CN6: PF Motor Connector
CN7: CR Encoder FFC
CN8: Head FFC
CN9: PF Sensor Cable
CN4
Dissasembly Procedures
CN7
CN8
Main Board Unit
CN9
CN5
CN2
CN4
Figure 4-35. Removing Main Board (1)
Revision A
57