Converting From Natural Gas To Lp Gas; Conversion To Lp Gas - Electrolux E30GF74GPS Installation Instructions Manual

INSTRUCTIONS FOR CONVERTING RANGE
OPERATION TO OPERATE ON LP GAS
INSTALLATION AND SERVICES MUST BE PERFORMED BY
IMPORTANT: SAVE FOR THE LOCAL ELECTRICAL INSPECTOR'S USE.
READ AND SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
W A R N I N G W A R N I N G
W A R N I N G W A R N I N G W A R N I N G
This conversion kit must be installed by a qualified service technician in accordance
with the manufacturer's instructions and all applicable codes and requirements of the
authority having jurisdiction. Failure to follow instructions may result in fire, explosion
or production of carbon monoxide causing property damage, personal injury or loss of
life. The qualified service agency is responsible for the proper installation of this kit.
The installation is not proper and complete until the operation of the converted
appliance is checked as specified in the manufacturer's instructions supplied with this
kit.
C A C A UTION UTION
C A C AUTION C A UTION UTION
Before proceeding with the conversion, shut off the gas supply before disconnecting
electrical power to the range. Be sure power supplies are off before installing the
conversion kit. Failure to do so could cause serious bodily injury.
TOOLS REQUIRED FOR L.P. CONVERSION:
1/8" WIDE FLAT BLADE SCREWDRIVER

Conversion To LP Gas

A QUALIFIED INSTALLER.
3/8" AND 5/8" OPEN END WRENCH
PHILLIPS SCREWDRIVER
9/32 NUT DRIVER
5/32 NUT DRIVER
7mm NUT DRIVER
21