Adjusting The Sound Adjusting The Bass, Treble And Balance; Creating Wider Stereo Sound; Muting The Sound; Using The Timer Setting The Wake-Up Timer - Pioneer XC-IS22CD Operating Instructions Manual

8
Adjusting the sound
Adjusting the bass, treble
and balance
To help you get the sound you want you can increase or reduce
the bass and treble, or change the left/right balance.
1 Press SOUND MODE (remote) to select BASS,
TREBLE or BALANCE.
If you're using the front panel controls, press
.
BALANCE
Use the – · 4 and ¢ · + buttons (remote) or the
2
JOG dial (front panel) to adjust the sound.
The bass and treble can be adjusted in the range –4 to +4;
balance from Left 10 to Right 10.
Note: To confirm the setting and exit immediately, you can
press on the front panel.
SET

Creating wider stereo sound

The Enhance feature makes the stereo spread appear wider than
it really is —useful when the speakers are close together.
1 Press SOUND MODE (remote) to select ENHANCE.
If you're using the front panel controls, press
Use the – · 4 and ¢ · + buttons (remote) to select
2
the ENHANCE mode.
•
1
ENHANCE
•
2
ENHANCE
• (
OFF ENHANCE
If you're using the front panel controls, press
select the Enhance mode.
Note: To confirm the setting and exit immediately, you can
press on the front panel.
SET

Muting the sound

If you need to momentarily turn off any sound coming out of
the speakers, use the
zero.
1 Press MUTE to switch off the volume.
The bass/mute indicator on the amplifier unit lights up (except
UK model) and
MUTE
To switch the sound back on, press
22
En
,
BASS
ENHANCE
0)
ENHANCE
button to turn the volume down to
MUTE
is displayed briefly.
again.
MUTE
Using the timer
Setting the wake-up timer
Use the wake-up timer to set the system to switch on at any time
and start playing your choice of source.
Note
• The clock must be set to the correct time for the wake-up
timer to work properly. (see page 12)
• You cannot have the record timer and the wake-up timer set
or
TREBLE
at the same time.
1 Select the source you want played.
For example, press
2 Prepare the source.
For example, tune in the radio station you want to wake up to.
If you've selected a CD or tape, make sure that it's stopped.
3 Set the volume.
4 Press TIMER/CLOCK ADJ.
5 Turn the JOG dial until you see WAKE UP displayed.
6 Press SET.
7 Turn the JOG dial until you see TIMER EDIT dis-
played.
.
8 Press SET.
9 Set the switch-on time.
Use the
JOG
in the same way, pressing
10 Set the switch-off time.
Use the
JOG
to
in the same way, pressing
The
WAKE UP
times are confirmed in the display after pressing
time.
1 1 Switch the system into standby mode.
The wake up timer will not work if the system is left on!
• You can check the timer settings in standby by pressing
TIMER

Turning the wake-up timer on/off

If the wake-up timer is active, it will switch on everyday at the
time you have set. Here's how to turn it on or off:
1 Press TIMER/CLOCK ADJ.
2 Turn the JOG dial until WAKE UP is displayed.
3 Press SET.
4 Turn the JOG dial until TIMER ON or TIMER OFF is
displayed.
You must have the timer set (see above) to select
5 Press SET.
The
WAKE UP
disappears when it's inactive.
to select the radio as your source.
TUNER
dial to set the hour, then press
when you're done.
SET
dial to set the hour, then press
when you're done.
SET
indicator lights and switch-on and switch-off
/ .
CLOCK ADJ
indicator lights when the timer is active and
. Set the minute
SET
. Set the minute
SET
this last
SET
.
TIMER ON