Connecting The Speakers; To Connect A Speaker Cord To A Terminal; Connecting The Radio Antennas - Pioneer XC-IS22CD Operating Instructions Manual

Connecting up

Connecting the speakers

Use the supplied red and black speaker cords to connect the
speakers to the main unit. To get the best sound from the
system, it's important that you connect the two strands of
speaker cord for each speaker to the correct speaker terminal.
The terminals and cords are color-coded to help you match
them up.
Important
Make sure that the bare speaker wires cannot touch each other,
or come into contact with other metal parts once the unit is
switched on.
To connect a speaker cord to a
terminal
This is shown in the diagrams below.
1 Pull off the protective covers on the ends of each
cord, then twist the exposed wire strands together.
2 Push the tab to open, then insert the twisted wire
fully into the terminal.
3 Release the tab to secure the speaker cord.
2
1
3
Connecting the radio
antennas
Connecting the supplied antennas will allow you to listen to
both AM and FM radio broadcasts. If you find that reception
quality is poor, an outdoor antenna should give you better sound
quality—see Connecting external antennas on page 8 for
more on how to do this.
Important
Before making or changing antenna connections, make sure
that the power is switched off and the unit disconnected from
the wall power outlet.
1 Pull off the protective shields of both AM antenna
wires.
2 Push open the tabs, then insert one wire fully into
each terminal.
3 Release the tabs to secure the AM antenna wires.
4 Fix the AM loop antenna to the attached stand.
To fix the stand to the antenna, bend in the direction indicated
by the arrow (fig. A) then clip the loop onto the stand (fig.
B).
Note
If you plan to mount the AM antenna to a wall or other surface,
secure the stand with screws (fig. C) before clipping the loop to
the stand. Make sure the reception is clear.
5 Place the AM antenna on a flat surface and point in
the direction giving the best reception.
Avoid placing near computers, television sets or other electrical
appliances and do not let it come into contact with metal
objects.
6 Connect the FM wire antenna in the same way as the
AM loop antenna.
For best results, extend the FM antenna fully and fix to a wall or
door frame. Don't drape loosely or leave coiled up.
The supplied FM antenna is a simple means of receiving FM
stations; using a dedicated, outdoor FM antenna will usually
give you better reception and sound quality. See Connecting
external antennas on page 8 for connection details.
UK model
ANTENNA
fig. A
FM
UNBAL
75 Ω
AM
LOOP
ANTENNA
H
ANTENNA
5
H
FM
UNBAL
75 Ω
AM
LOOP
4
ANTENNA
H
fig. B fig. C
2
7
En