Page 1
This book has important information for the use and safe operation of this machine. Failure to read this book prior to operating or attempting any service or maintenance procedure to your Clarke machine could result in injury to you or to other personnel; damage to the machine or to other property could occur as well.
12. Do not use without dust bag and/or filters in place. Use the machine only with an undamaged filter element. 13. Turn off all controls before unplugging. 14. Use extra care when cleaning on stairs. 16. Connect to properly grounded outlet. See "Grounding Instructions". SAVE THESE INSTRUCTIONS Clarke ® Page Wet/Dry Vacuums Operator's Manual...
Page 4
Failure to read the Owner's Manual prior to operating or attempting any service or maintenance procedure to your Clarke machine could result in injury to you or to other personnel; damage to the machine or to other property could occur as well.
CAUTION: The operating instructions and the safety precautions contained therein must be observed when using appliances connected to the appliance plug socket of the machine. ® Clarke Page -14- Wet/Dry Vacuums Operator's Manual...
3. Fit the machine top section back on the tank, and close the retaining clamps. 4. Connect the suction hose. The "Wap Multifit" enables any Clarke suction hoses (27, 32, 36, 50 mm diameter) to be connected to the machine (Figure 4). Figure 2...
The motor speed and thus the suction power can be varied at the suction force regulator. This permits a precise adaptation to different substances to be picked up. ® Clarke Page -18- Wet/Dry Vacuums Operator's Manual...
Page 9
After Finishing Work 1. Switch off the machine and pull the plug of the power cord out of the plug socket. 2. Wind up the power cord. ® Clarke Page -20- Wet/Dry Vacuums Operator's Manual...
MAINTENANCE AND REPAIR CAUTION: Before cleaning and servicing the machine, always remove the power cord. Carry out only maintenance operations described in these operating instructions. Use only original Clarke spare parts. Figure 8 CAUTION: Do not make any technical modifications to the machine. Your safety...
3. Nettoyez et replacez l'élément de filtrage. 3. L'élément de filtrage est bouché. Aucune force d'aspiration 1. Videz le réservoir. 1. Le réservoir est plein (le commutateur à pendant nettoyage flotteur refermant l'ouverture d'aspiration). humide. ® Clarke Page -24- Wet/Dry Vacuums Operator's Manual...
Clarke ® CTV 15 & 20 Head Assembly Parts List 3/05 Ref. Part No. Description Qty Qty Qty Qty Qty 60603000 Handle 60601000 Cover, Top 538423 Clamp 60604000 Housing, Upper 60867 Switch, Main Power 30001200 Foam, 20 x 60 60610200 Ring Distance...
® Clarke CTV 7, 15 & 20 Accessory Tools Drawing and Parts List 4/03 Repair Parts 70000219 Brush Strips for 11604703 70000220 Squeegee Blades for 7270 70000221 Wheel & Axles for 7270 & 11604703 30340A Squeegee Blades for 52851A 30341A...
Page 23
® Clarke CTV 7, 15 & 20 Accessory Tools Drawing and Parts List 8/02 Clarke ® Page -39- Wet/Dry Vacuums Operator's Manual...