Para obtener instrucciones en Español, diríjase a la página 5.
VM9214
VM9214 Head Unit
Single DIN Sleeve
Wiring Harness
Parking Brake Sensor Extension Wire
Mounting Hardware
You will need these tools and supplies to install your VM9214:
•
Torx type, À at-head and Philips screwdrivers
•
Wire cutters and strippers
•
Tools to remove existing radio (screwdriver, socket wrench set or other tools)
•
Electrical tape
•
Crimping tool
•
Volt meter/test light
•
Crimp connections
•
18 gauge wire for power connections
•
16 – 18 gauge speaker wire
WARNING! Never install this unit where operation and viewing could interfere with safe driving
conditions.
Pour des instructions en Francais, référez-vous à la page 9.
VM9214
What's in the Box
Tools and Supplies
1
Instruccionnes de Instalación
Instructions d'installation
A / V
INPUT
Cosmetic Trim Ring
Remote Control with Battery
3.5mm to 3.5mm Media Adaptor Cable
Owners Manual
Installation Guide
Installation Guide
EJECT