Table of Contents
Advertisement
Construction:
Tool Holder:
Air Inlet:
Overall Dimensions:
You will need the manual for the safety warnings and precautions, assembly instructions, operat-
ing and maintenance procedures, parts list and diagram. Keep your invoice with this manual. Write the
invoice number on the inside of the front cover. Keep the manual and invoice in a safe and dry place for
future reference.
WARNING: When using tool, basic safety precautions should always be followed to reduce the risk
of personal injury and damage to equipment. Read all instructions before using this tool!
1.
Keep work area clean. Cluttered areas invite injuries.
2.
Observe work area conditions. Do not use machines or power tools in damp or wet locations.
Don't expose to rain. Keep work area well lit. Do not use electrically powered tools such as an air
compressor in the presence of flammable gases or liquids.
3.
Keep children away. Children must never be allowed in the work area. Do not let them handle
machines, tools, or extension cords.
4.
Store idle equipment. When not in use, tools must be stored in a dry location to inhibit rust.
Always lock up tools and keep out of reach of children.
5.
Use the right tool for the job. Do not attempt to force a small tool or attachment to do the work of a
larger industrial tool. There are certain applications for which this tool was designed. It will do the job
better and more safely at the rate for which it was intended. Do not modify this tool and do not use
this tool for a purpose for which it was not intended.
6.
Dress properly while working. Do not wear loose clothing or jewelry as they can be caught
in moving parts. Protective, electrically non-conductive clothes and non-skid footwear are
recommended when working. Wear restrictive hair covering to contain long hair.
7.
Use eye and ear protection. Always wear ANSI approved impact safety goggles. Wear a full
face shield if you are producing metal filings or wood chips. Wear an ANSI approved dust mask or
respirator when working around metal, wood, and chemical dusts and mists.
WARNING! Some dust created by power sanding, sawing, grinding, drilling, and other construction
activities, contain chemicals known (to the State of California) to cause cancer, birth defects or
other reproductive harm. Some examples of these chemicals are: lead from lead-based paints,
crystalline silica from bricks and cement or other masonry products, arsenic and chromium from
chemically treated lumber. Your risk from these exposures varies, depending on how often you do
this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and
work with approved safety equipment, such as those dust masks that are specially designed to filter
out microscopic particles. (California Health & Safety Code § 25249.5, et seq.)
SKU 93727
Specifications
Cast Aluminum Housing with
Machined Steel Components
1/4" Collet
1/4" npt
6-¼"L x 3"H x 1-½"W
Save This Manual
Safety Warnings and Precautions
For technical questions, please call 1-800-444-3353
90 psi operating pressure
Air Consumption:
3.25 cfm air consumption
Operating Speed:
16,000 rpm max.
Air Inlet Screen:
20 mesh
Net Weight:
1-¼ lbs.
Page 2
Advertisement
Table of Contents
