Page 1
2008 by Harbor Freight Tools manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. For technical questions or replacement parts, please call 1-800-444-3353. Manual Revised 11h...
Use safety equipment. A dust mask, non-skid safety shoes and a hard hat must be used for the applicable SKU 97870 For technical questions, please call 1-800-444-3353. conditions. Wear heavy-duty work gloves during use. Always wear eye protec- tion.
Check for misalignment or bind- ing of moving parts, breakage of parts, and any other condition that SKU 97870 For technical questions, please call 1-800-444-3353. affects the tool’s operation. If dam- aged, have the tool serviced before using.
Hearing Loss. Wear hearing protection. WARNING marking concerning Risk of Respiratory Injury. Wear NIOSH- approved dust mask/respirator. Chart continued in next column. SKU 97870 For technical questions, please call 1-800-444-3353. Symbol Definitions Symbol Property or statement WARNING marking concerning Risk of Explosion.
Raynaud’s Disease should not use SKU 97870 For technical questions, please call 1-800-444-3353. this tool. If you feel any medical or physical symptoms related to vibra-...
When unpacking, check to make sure that the item is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at the number shown throughout the manual as soon as possible. • This air tool may be shipped with a protective plug covering the air inlet.
Page 9
Inspect the air connections for leaks. Repair any leaks found. SKU 97870 For technical questions, please call 1-800-444-3353. If the tool will not be used at this time, turn off and detach the air sup-...
Clamping Nut (22), slide the bit’s shank through the Clamping Nut and through the 1/8” Collet (21). SKU 97870 For technical questions, please call 1-800-444-3353. Tighten finger tight, then use the two Collet Nut Wrenches, one on the top...
Page 11
Clean external surfaces of the tool with clean, dry cloth, and apply a thin coat of tool oil. Then store the tool indoors out of children’s reach. SKU 97870 For technical questions, please call 1-800-444-3353. Page 11...
Cleaning and Maintenance Note: These procedures are in addition to the regular checks and maintenance SKU 97870 For technical questions, please call 1-800-444-3353. explained as part of the regular op- eration of the air-operated tool. Daily - Air Supply Maintenance:...
4. Dirty, worn or damaged Control Ring (3). Follow all safety precautions whenever diagnosing or servicing the tool. Disconnect air supply before service. SKU 97870 For technical questions, please call 1-800-444-3353. Troubleshooting Likely Solutions 1. Check for loose connections and make sure...
AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. SKU 97870 For technical questions, please call 1-800-444-3353. Function Tighten/loosen Clamping Nut...
Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not avail- able individually as replacement parts. SKU 97870 For technical questions, please call 1-800-444-3353. Q’ty...
Page 16
90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.