When Received A Call - Kenwood DNX8120 Instruction Manual

• : Displays the signal strength.*
The more the number of bar segments,
the stronger the signal.
. . : Displays the present Auto Answering
status
. . : When Auto Answering is on
B : When Auto Answering is off
m:
Displays the battery drain of the cell-
nhnnA*
r-"
,~, ,~.
The more the number of bar segments,
the higher the battery level.
[1]
Displays the called phone numbers.
If you have registered a phone number in
the Phonebook, the destination person
name is displayed.
[lJ
Calls the displayed preset phone number.
@]
Displays the SMS Select screen.
See <SMS (Short Message Service» (page
62).
[]] Displays the Search for Phonebook screen.
See <Calling by Phonebook> (page 55).
[]] Displays the Outgoing Calls screen.
See <Making a Call Using Outgoing/
Incoming Call Records> (page 57).
[l]
Displays the Incoming Calls screen.
See <Making a Call Using Outgoing/
Incoming Call Records> (page 57).
[]] Calls the preset phone number.
For information on how to preset a phone
number,
see
<Phone Number Preset> (page
61).
lID
Displays the Hands Free Set Up screen.
See <Setting Up the Hands Free Phone>
(page 58).
[Q]
Displays the Dialing Display screen.
See <Calling by Entering a Phone Number>
(page 54).
[1]
Starts voice recognition.
See <Calling by Voice Recognition> (page
57).
[g]
Returns to the previous screen.
T~
• While your car is moving, some functions are disabled for
safety's sake. The buttons associated with the disabled
functions become ineffective if pressed.
• When the Hands Free Control screen appears, the name
of the connected cell-phone is displayed for 5 seconds.
• *
Since the number of steps of the control unit is different
from that of the cell-phone, the statuses displayed on
the control unit may discord from those displayed on
1
the cell-phone. No status is displayed if information
about it cannot be obtained.
• Setting the cell-phone in the private mode can disable
the hands free function.
When Received a Call
When you receive a call, you can use the hands
free phone.
D
Respond to a call
When a call arrives, the Talking screen appears
automatically.
IT]
Starts conversation with a person called.
Switches the call destination if you hear a
tone of call-waiting.
Resumes conversation with the person on
hold after completed conversation with the
other party.
[1]
Disconnects the phone.
The Hand Free screen reappears.
[l]
Switches the voice output between phone
and speaker.
!1J
Outputs dial tone.
See <Controlling Tone-based Services>
(page 55).
English 53