Kenwood DNX8120 Instruction Manual page 142

The Map and Other Tools
Turn List
The Turn List displays a list of turn-by-turn
instructions for your entire route, as well as arrival
information.
While navigating a route, touch the text bar on
the map page to open the Turn List. Or, from the
Menu page, touch Tools> Turn
List.
OJ
Direction of this turn
[I]
Distance to this turn
[II
Turn directions
• Touch View All to see all the turns on the route. Touch
. . a n d " to scroll through the list.
Touch a turn to see the turn on a map (the Next Turn
page).
Next Turn Page
• Touch" a n d " to scroll through all the turns on
the route. Touch
+
and - to zoom in and out of the
turn on the map.
•
GPS Info Page
From the Menu page, touch the signal strength
bars in the upper left corner to view the GPS Info
page. Or, from the Menu page, touch Tools> GPS
Info.
OJ
Sky
view
[I]
Satellite signal-strength bars
The sky view shows the satellites you are
receiving. The satellite signal-strength bars
indicate the strength of each satellite you are
receiving. A solid bar indicates the GPS satellite is
ready for use.
GPS Settings
From the Menu page, touch Settings> General
>
GPS. You can also access the GPS Settings by
touching the GPS Settings button on the GPS
Info page.
Simulator Mode-touch Off to turn the GPS receiver
off
Set Position-set your position, if Use Indoors is
enabled. Select your location on the map and touch OK.
• WAAS/EGNOS-disable and enable WAAS/EGNOS.
WAAS and EGNOS are systems of satellites and ground
stations that provide GPS signal corrections, giving you
even better position accuracy. To learn about WAAS and
EGNOS, visit www.garmin.com/aboutGPS/waas.html.
18
DNX7120/DNX8120 GPS Navigation Instruction Manual
The Map and Other Tools
Turn List
The Turn List displays a list of turn-by-turn
instructions for your entire route, as well as arrival
information.
While navigating a route, touch the text bar on
the map page to open the Turn List. Or, from the
Menu page, touch Tools> Turn
List.
OJ
Direction of this turn
[I]
Distance to this turn
[II
Turn directions
• Touch View All to see all the turns on the route. Touch
. . a n d " to scroll through the list.
Touch a turn to see the turn on a map (the Next Turn
page).
Next Turn Page
• Touch" a n d " to scroll through all the turns on
the route. Touch
+
and - to zoom in and out of the
turn on the map.
•
GPS Info Page
From the Menu page, touch the signal strength
bars in the upper left corner to view the GPS Info
page. Or, from the Menu page, touch Tools> GPS
Info.
OJ
Sky
view
[I]
Satellite signal-strength bars
The sky view shows the satellites you are
receiving. The satellite signal-strength bars
indicate the strength of each satellite you are
receiving. A solid bar indicates the GPS satellite is
ready for use.
GPS Settings
From the Menu page, touch Settings> General
>
GPS. You can also access the GPS Settings by
touching the GPS Settings button on the GPS
Info page.
Simulator Mode-touch Off to turn the GPS receiver
off
Set Position-set your position, if Use Indoors is
enabled. Select your location on the map and touch OK.
• WAAS/EGNOS-disable and enable WAAS/EGNOS.
WAAS and EGNOS are systems of satellites and ground
stations that provide GPS signal corrections, giving you
even better position accuracy. To learn about WAAS and
EGNOS, visit www.garmin.com/aboutGPS/waas.html.
18
DNX7120/DNX8120 GPS Navigation Instruction Manual