Table of Contents
Advertisement
DISPLAY
The display shows the following information:
Duration of the selected programme
After selecting a programme, the duration of the washing programme and the
extimated end of cycle are displayed in hours and minutes (for example
The duration is calculated automatically on the basis of the maximum
recommended load for each type of fabric.
After the programme has started, the time remaining is updated every minute.
Programme progress display
After having pressed the START/PAUSE button, the display shows the running
phase of the washing program.
On the display you can see also the description of the selected type of fabric, an
animated bar, that indicates the carried out cycle and the remaining one, the
duration of the washing program and the end of cycle.
Delay start
If you have selected the DELAY START, the relevant icon
side of the display
After having pressed the START/PAUSE button, the selected delay time value
(max 20 hours) appears on the right side of the display, closed to the
corresponding icon
The delay time value decreases every minute.
Incorrect option selection
If an option, which is not compatible with the set washing programme, is
selected, the message «Non selectable» is displayed for some seconds.
Alarm codes
In the event of operating problems, some alarm messages can be displayed, for
example «Cannot fill water. Please check that the tap is open and then
press START/PAUSE». (see paragraph «Something not working»).
End of the programme
When the programme has finished the messages «Door Unlocked» and
«Finished» appear alternatively.
The START/PAUSE button pilot light goes off.
.
Use
19
2.05
).
appears on the right
Hide quick links:
Advertisement
Table of Contents
