First Use; Setting The Language; Setting The Time - AEG Electrolux LAVAMAT 84950 Instruction Booklet

First Use

Ensure that the electrical and water connections comply with the installation
instructions.
Remove the polystyrene block and any material from the drum.
Run a cotton cycle at 95°C, without any laundry in the machine, to remove any
manufacturing residue from the drum and tub. Pour 1/2 a measure of detergent
into the dispenser drawer and start the machine.

Setting the language

When switching on the appliance for the first time, by turning the programme
selector dial, you must set the language in which you want the messagges in the
display to appear. When the appliance is switched on again all the messagges in
the display will appear in this language.
Important!
If the display is not showing any language, the appliance has already been
switched on once. In such case, if you would change the language setting, press
at the same time «TEMP» and «SPIN» buttons for 6 seconds to activate the
menu language. By pressing the «OPTIONS» button you can scroll all the
available languages.
Press the Ok button twice to confirm your choice.

Setting the time

After having chosen the language you must set the time prior to the first wash
and when changing to and from daylight savings time.
The clock setting permits you to modify/set up the current time. It is important
to keep it updated as the current END Cycle Time depends on it.
With a short/single time pressure of the «OPTIONS» button, the time varies
minute by minute. With a continue pressure of the same buttons, the time varies
10 minutes by 10 minutes.
Press the OK button to fix the current time.
Use 11