Table of Contents
Advertisement
Ofrecido por www.electromanuales.com
At the end of the programme
The machine stops automatically, the Start/Pause light goes off and a flashing
will appear on the display.
If the Rinse Hold
illuminates, a flashing
and the door remains locked to indicate that the water must be emptied out
before opening the door.
To empty out the water please read the steps on the Rinse Hold option
paragraph.
Turn the programme selector dial to «O» to switch the machine off.
Remove the laundry from the drum and carefully check that the drum is empty.
If you do not intend to carry out another wash, close the water tap. Leave the
door open to prevent the formation of mildew and unpleasant smells.
Child safety lock
This device permits you to leave the
appliance unsupervised without having the
worry that children might be injured by or
cause damage to the appliance.
This function remains able also when the
washing machine is not working.
There are two different ways to set this
option:
before pressing the «Start/Pause»: it will be impossible to start the machine.
●
after pressing the «Start/Pause» it will be impossible to change any other
●
programme or option.
To enable (disable) this option press simoultaneously for about 6 seconds «Stain»
and «Sensitive» buttons until the icon
display.
option have been selected, the «Door» pilot light
0
will appear on the display, the Start/Pause light goes off
appears (disappears) on (from) the
Use
19
0
Advertisement
Table of Contents
