Getting Started; Caring For Your Heart Rate Sensor - Polar Electro WEARLINK User Manual

firmly against your skin and that the Polar
logo of the connector is in a central and
upright position. Picture B4.
Detach the connector from the strap and rinse
the strap under running water after every use.
See detailed washing instructions in the Caring
for Your Heart Rate Sensor section.

Getting Started

When using the Polar WearLink heart rate
sensor with
need to pair the heart rate sensor with your
receiving device. For more information on
enabling the heart rate sensor and starting the
application, consult separate user instructions
supplied by the application manufacturer.
In case the application asks for a PIN code,
please enter 0000. The PIN code is printed
also on the back of the connector.
To ensure sufficient transmission range from
your heart rate sensor to the receiving device,
keep the receiving device as close as possible to
the heart rate sensor. A good place is in a
pocket, fixed on the belt or in a small bag on
the side. Do not wear the receiving device on
your back (for example, in a back pocket or
back pack).

Caring for Your Heart Rate Sensor

The heart rate sensor is a high-tech instrument
that should be handled with care. Follow the
caring instructions to ensure reliable
measurement and to maximize the life span of
the heart rate sensor. The following instructions
will help you fulfill guarantee obligations.
Connector:
after every use and dry the connector with a soft
towel. Clean the connector with a mild soap and
2 E N G L I S H
®
Bluetooth
Detach the connector from the strap
for the first time, you