Specifications - Sony GTK-X1BT Operating Instructions Manual

Specifications

AUDIO POWER
SPECIFICATIONS
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION:
(USA model only)
With 6 ohm loads, both channels driven,
from 120 10,000 Hz; rated 75 watts per
–
channel minimum RMS power, with no
more than 0.7% total harmonic distortion
from 250 milliwatts to rated output.
Amplifier section
The following are measured at
USA model:
AC 120 V, 60 Hz
Mexican model:
AC 127 V, 60 Hz
European and Russian models:
AC 220 V – 240 V, 50/60 Hz
Chilean and Bolivian models:
AC 220 V – 240 V, 50 Hz
Other models:
AC 120 V – 240 V, 50/60 Hz
Power output (rated)
150 W + 150 W (at 6 ohms, 1 kHz,
1% THD)
RMS output power (reference)
250 W + 250 W (per channel at
6 ohms, 1 kHz)
Inputs
AUDIO IN/PARTY CHAIN IN L/R
Voltage 2 V, impedance 47 kilohms
Outputs
AUDIO OUT/PARTY CHAIN OUT L/R
Voltage 2 V, impedance 1 kilohm
30 GB
USB section
Supported format
MP3 (MPEG 1 Audio Layer-3):
32 kbps – 320 kbps, VBR
WMA: 48 kbps – 192 kbps
AAC: 48 kbps – 320 kbps
WAV: 16 bit PCM
Sampling frequencies
MP3 (MPEG 1 Audio Layer-3):
32 kHz/44.1 kHz/48 kHz
WMA: 32 kHz/44.1 kHz/48 kHz
AAC: 32 kHz/44.1 kHz/48 kHz
WAV: 8 kHz – 48 kHz
Supported USB device
Mass Storage Class
Maximum current
1 A
(USB) port
Type A
Bluetooth section
Communication system
Bluetooth Standard version 3.0
Output
Bluetooth Standard Power Class 2
Maximum communication range
Line of sight approx. 10 m
Frequency band
2.4 GHz band (2.4000 GHz –
2.4835 GHz)
Modulation method
FHSS (Freq Hopping Spread
Spectrum)
Compatible Bluetooth profiles
A2DP (Advanced Audio Distribution
Profile)
AVRCP 1.3 (Audio Video Remote
Control Profile)
Supported codecs
SBC (Sub Band Codec)
AAC (Advanced Audio Coding)
aptX (aptX Codec)
1)
2)