3-1.
Bottom Panel Block Assy
Notes: On installation, adjust the position of both switch (S802) and knob (hold).
5 two screws
(M1.4)
3-2.
Upper Lid Block Assy
3 two screws
(M1.4)
2 Slide the knob (open) in the direction of the arrow,
and open the upper lid block assy.
S802
knob (hold)
7 Remove the bottom panel block assy
in the direction of the arrow.
1 Open the
4 Close the
battery terminal (plus) assy.
6 three screws
1 flexible board (CN891)
5 upper lid block assy
4 two screws
(M1.4)
MZ-N910
3 Remove the
battery case lid.
battery case lid.
2 claw
(M1.4)
7