Advertisement
Set-Up For Vibrations Use
5
IMPORTANT! Test reception of this monitor before first time
use and whenever you change location of transmitter (see page 5).
1
Set transmitter channel switch to same channel as receiver.
Place transmitter in same room with child. Point microphone
2
directly toward crib or play area.
3
Unwrap and fully extend power cord for best transmission.
Plug transmitter power cord into wall outlet.
4
Slide transmitter power switch to turn power on.
Power indicator lights.
5
Clip receiver to your clothing, where you will feel vibrations.
Or, place the receiver in your pocket.
6
Rotate receiver power/volume dial to turn power on. Power
indicator lights. Rotate power/volume dial to adjust volume
(if you want to hear sounds).
7
Press the vibrations button. Vibrations ready indicator lights.
Hint: Under permitting conditions, the receiver receives sounds (and you
will feel vibrations) up to 1,000 feet away from baby.
7
8
"Wah, Wah,
Wah..."
2
3
1
4
6
1
Advertisement
