Advertisement
Testing Reception (for Sound)
Test transmitter transmission and receiver reception
each time you change location of use.
Indicator
Set channel switch on transmitter to
the same channel as receiver. Place
transmitter in room in which you
intend to use it. Slide transmitter
power switch to turn power on.
Power indicator lights. Turn on a radio.
Hint: All five dots in receiver variable light display light:
- If you turn receiver power on before transmitter power. You will also hear
static noise. Turn volume down on receiver and turn transmitter power on.
- If the receiver is too far away from the transmitter. Move the receiver closer
to the transmitter.
- If loud sounds are transmitting.
Power
Power
Switch
Adjust
Channel
Place receiver in room in which
you intend to use it. Rotate the
power/volume dial to turn power
on. Power indicator lights. Adjust
receiver location.
• Variable light display lights when
sound is received by receiver:
- One two dots light for
shallow sounds.
- Three or more dots light for
louder sounds.
If you experience interference
(buzzing or static, etc.) while using
one channel setting, switch both
units to other channel. Selecting
a channel is usually a one time
adjustment.
4
Power/Volume
Dial
Power
Indicator
Advertisement
