Impex PWR SURGE Owner's Manual page 8

STEP 4 (See Diagram 4)
A.) Place the Headrest Board (#17) onto the Headrest Bracket (#12). Secure it with two M8
x ¾" Allen Bolts (#43) and
B.) Place the Backrest Board (#18) onto the Backrest Supports (#5). Secure it with four M6
x 1 3/8" Hex Bolts (#39) and
C.) Place the Seat Pad (#19) onto the Seat Bracket (#9). Secure it with four M8 x 5/8" Allen
Bolts (#40) and
hole on the Seat Bracket (#9) to obtain the desired incline of the Seat.
D.) Attach the Arm Curl Pad (#52) to the Arm Curl Stand (#14). Secure it with two M8 x 5/8"
Allen Bolts (#40) and
Right Upright Beam. For Arm Curl exercises, remove the Leg Developer and Insert the
Arm Curl Stand into the opening on the Front Stabilizer.
5/8" Washers (#46).
½" Washers (#45).
5/8" Washers (#46). Insert a L-shaped Pin (#48) into the selected
5/8" Washers (#46). Insert the Stand into the holder behind the
7
DIAGRAM 4