Page 1
Please read all instructions carefully before using this product Safety Notice Hardware Identifier Assembly Instruction Parts List Warranty Ordering Parts Model PWR SURGE Retain This Manual for Reference 07-23-01 OWNER'S MANUAL MARCY POWER SURGE WEIGHT BENCH IMPEX FITNESS PRODUCTS 14777 DON JULIAN RD., CITY OF INDUSTRY, CA 91746 Tel: (800) 999-8899 Fax: (626) 961-9966 www.impex-fitness.com...
ORDERING PARTS... 10 BEFORE YOU BEGIN Thank you for selecting the MARCY Power Surge Weight Bench by IMPEX FITNESS PRODUCTS. For your safety and benefit, read this manual carefully before using the machine. As a manufacturer, we are committed to provide you complete customer satisfaction.
PHYSICIAN. THIS IS ESPECIALLY IMPORTANT FOR INDIVIDUALS OVER THE AGE OF 35 OR PERSONS WITH PRE-EXISTING HEALTH PROBLEMS. READ ALL INSTRUCTIONS BEFORE USING ANY FITNESS EQUIPMENT. IMPEX INC. ASSUMES NO RESPONSIBILITY FOR PERSONAL INJURY OR PROPERTY DAMAGE SUSTAINED BY OR THROUGH THE USE OF THIS PRODUCT.
ASSEMBLY INSTRUCTION Tools Required to Assemble the Machine: Two Adjustable Wrenches and Allen Wrenches. NOTE: It is strongly recommended this machine to be assembled by two or more people to avoid possible injury. STEP 1 (See Diagram 1) A.) Connect the Right and Left Upright Beams (#1) & (#2) by a Cross Brace (#4) in the mid- span.
Page 6
A.) Slide the Sliding Block (#7) onto the Main Seat Support (#6). Secure it with a Knob (#50) to a selected hole on the Main Seat Support. B.) Attach the Front Stabilizer (#8) to the Main Seat Support (#6). Secure it with one M10 x 2 ½”...
Page 7
A.) Attach the Leg Developer (#15) to the bracket on the Leg Developer Holder (#16). Secure it with an Axle (#24), two B.) Insert one Foam Roll Tube (#21) halfway through the holes on the Leg Developer Holder (#16). Then insert two Foam Roll Tubes (#21) halfway through the holes on the Leg Developer (#15).
Page 8
STEP 4 (See Diagram 4) A.) Place the Headrest Board (#17) onto the Headrest Bracket (#12). Secure it with two M8 x ¾” Allen Bolts (#43) and B.) Place the Backrest Board (#18) onto the Backrest Supports (#5). Secure it with four M6 x 1 3/8”...
PARTS LIST KEY NO. DESCRIPTION Q’ty Right Upright Beam Left Upright Beam 1 Backrest Adjustment Bar Cross Brace Backrest Support Main Seat Support Sliding Block Front Stabilizer Seat Bracket Left Bar Catch Right Bar Catch Headrest Bracket Squat Bar Catch Arm Curl Stand Leg Developer Leg Developer Holder...
IMPEX. IMPEX is not responsible or liable for indirect, special or consequential damages arising out of or in connection with the use or performance of the product or other damages with respect to any economic loss, loss of property, loss of revenues or profits, loss of enjoyments or use, costs of removal, installation or other consequential damages or whatsoever natures.