Advanced Routing; Static Routing - TP-Link TL-WR847N User Manual

TL-WR841N/TL-WR841ND/TL-WR847N
2. In Schedule Description field, create a unique description for the schedule (e.g.
Schedule_1).
3. In Day field, check the Select Days radio button and then select Sat and Sun.
4. In Time field, enter 1800 in Start Time field and 2000 in Stop Time field.
5. Click Save to complete the settings.
Then you will go back to the Schedule Settings page and see the following list.

4.12 Advanced Routing

Figure 4-61 Advanced Routing Menu
There are two submenus under the Network menu (shown in Figure 4-61): Static Routing List
and System Routing Table. Click any of them, and you will be able to configure the
corresponding function.
4.12.1

Static Routing

Choose menu "Advanced Routing → Static Routing", and you can configure the static route in
the next screen, shown in Figure 4-62. A static route is a pre-determined path that network
information must travel to reach a specific host or network.
To add static routing entries, follow the steps below.
1. Click Add New... shown in Figure 4-62, you will see the following screen Figure 4-63.
2. Enter the following data.
Figure 4-62 Static Routing
Figure 4-63 Add or Modify a Static Route Entry
- 63 -
300Mbps Wireless N Router User Guide