Set Up A Stereo Headset - Pantech Telus PN-8200 User Manual

SET UP A STEREO HEADSET

Windows Mobile-based devices support A2DP (Advanced Audio
Distribution Profile), which is used by Bluetooth-enabled stereo
headsets. Make sure that your stereo headset also supports A2DP.
1 Make sure that your device and the stereo
headset are turned on, discoverable, and within
close range.
2 In the Home screen, press [Start], select
Settings, press O [OK].
3 Scroll to Connections and press O [OK].
4 Select Bluetooth and press O [OK].
5 Press [Menu] the Devices and press O [OK].
6 Press [Menu], [New]. Your device searches for
other Bluetooth-enabled devices and displays
them in the list.
7 Select stereo headset, and press [Add].
8 In Passkey, enter the alphanumeric passkey for
the Bluetooth-enabled stereo headset. You can
find this in the manufacturer's documentation for
your hands-free device. Press [Next].
9 Check the Hands Free service, and press
[Finish].
If the headset becomes disconnected, turn the headset on and
repeat steps 1-4 above. Select the stereo headset and press
[Menu] then select Set as Wireless Stereo.
BLUETOOTH
211
C
H
8