Table of Contents
Advertisement
At a glance
Programmable memory
buttons
General information
The iDrive functions can be stored on the pro‐
grammable memory buttons and called up di‐
rectly, e.g., radio stations, navigation destina‐
tions, phone numbers and entry points into the
menu.
The settings are stored for the remote control
currently in use.
Saving a function
1.
Highlight the function via the iDrive.
2.
Press the desired button for more
than 2 seconds.
Running a function
Press the button.
The function will run immediately. This
means, for example, that the number is dialed
when a phone number is selected.
Displaying the button assignment
Use a finger to touch the buttons. Do not wear
gloves or use objects.
The key assignment is displayed at the top
edge of the screen.
▷
To display short information: touch the
button.
▷
To display detailed information: touch the
button for an extended period.
22
iDrive
Online Edition for Part no. 01 40 2 910 949 - VII/13
Deleting the button assignments
1.
Press buttons 1 and 8 simultaneously for
approx. five seconds.
2.
"OK"
Entering letters and numbers
General information
1.
Turn the controller: select letters or num‐
bers.
2.
Select additional letters or numbers if
needed.
3.
"OK": confirm the entry.
Depending on the menu, you can switch be‐
tween entering upper and lower case, letters
and numbers:
Symbol Function
Press the controller: delete the let‐
ter or number.
Press the controller for an extended
period: delete all letters or numbers.
Switching between cases, letters and
numbers
Depending on the menu, you can switch be‐
tween entering upper and lower case, letters
and numbers:
Symbol
Function
Enter the letters.
Enter the numbers.
or
Move the controller up.
Without navigation system
Select the symbol.
Advertisement
Table of Contents
