Redial - BT Synergy 700 User Manual

Synergy 700 user guide ~ 5th Edition ~ 17th April '02 ~ 4411
To receive a call
When the phone rings the
display will show CALL and
the EXT symbol will flash.
If you have subscribed to a
Caller Display Service, the
number (and name if stored
in the phonebook) will be
displayed.
Press the TALK button to
answer the call.
Or
If the handset is on the base,
simply lift it up and speak.
To adjust the earpiece volume
During a call:
You can adjust the earpiece
volume. There are 5 levels to
choose from.
Press the UP or DOWN
button until you reach the
Volume
required level.
In standby mode:
Press the
Press the DOWN button until
Volume
HANDSET is displayed.
Press the
Press the DOWN button until
Volume
EAR VOL is displayed.
button.
button.
Press the
Press the UP or DOWN
button until you reach the
Volume
required level.
Press the
the selected level.
Press and hold the
return to the idle screen.
Note
The symbol on your handset display
indicates when you are in range of
the base station. If the symbol flashes
and you hear a warning beep, you
are out of range and will need to move
closer to the base station.
The handset has a range of up to
300 metres outdoors and up to 50
metres indoors (in ideal conditions).

Redial

You can redial up to 5 of the last
numbers called. They are stored in the
redial list. If you have stored a name
to go with a number in the phonebook,
the name will be displayed instead.
See phonebook, page 17.
button.
button to confirm
✘
button to
16