Table of Contents
Advertisement
Synergy 700 user guide ~ 5th Edition ~ 17th April '02 ~ 4411
After the tone enter the day,
followed by the time using the
24 hour clock.
1 = Sun, 2 = Mon,
3 = Tues, 4 = Wed,
5 = Thur, 6 = Fri, 7 = Sat.
For example:
1 1415 = Sunday 2.15pm.
Or
5 0915 = Thursday 9.15am.
You will then hear your setting
confirmed.
Press the
return the handset to standby.
Note
If the day and time is entered
incorrectly, the prompt will announce,
"Incorrect, please set again". Enter
the correct setting within 15 seconds
otherwise the handset will return to
standby mode. If the day and time
is entered incorrectly three times the
handset will return to standby.
Note
If you have any difficulties setting up
your Synergy 700 please call the
Helpline on 08706 058 047.
If you wish to register additional
handsets, please see page 49.
✘
button twice to
Please see the table below for your
Synergy 700 default settings.
Synergy 700 Default Settings Table
Feature
Day/Time Stamp
Answer Delay
Audible Message
Alert Tone
Outgoing Message
Answer Mode
Base ringer level
Base loudspeaker
volume
PIN code
Dialling mode
If you wish to personalise your
answering machine settings, for
example record your own outgoing
message etc, please see "Setting up
and personalising your answering
machine" beginning on page 31.
The Synergy 700 answering machine
will now be switched ON and set to
its default settings so your Synergy 700
is now ready for use.
Default Setting
Sunday 12:01 pm
Your answering
machine will answer
after 6 rings
OFF
Answer and Record
"Hello your call cannot
be taken at the
moment so please
leave your message
after the tone."
ON
High
Level 5
0000
Tone
14
Advertisement
Table of Contents
