Quick Start: Getting Up To Speed - Traxxas E-Maxx Brushless Edition 3908L Owner's Manual

The Quick Start Guide is
not intended to replace the
full operating instructions
available in this manual.
Please read this entire
manual for complete
instructions on the proper
use and maintenance of
your model.
8 • E-MAXX BRUSHLESS

QUICK START: GETTING UP TO SPEED

The following guide is an overview of the procedures for getting your model running. Look for the Quick Start logo on the bottom
corners of Quick Start pages.
1. Read the safety precautions on page 3
For your own safety, understand where carelessness and misuse
could lead to personal injury.
2. Charge the battery packs • See page 12
Fully charge the two included battery packs. Charge your batteries
now so it will be ready when you finish the other setup procedures.
3. Install batteries in the transmitter • See page 12
The transmitter requires 4 AA alkaline or rechargeable batteries.
4. Install battery packs in the model • See page 13
Your model requires two fully charged battery packs (included).
5. Turn on the radio system • See page 14
Make a habit of turning the transmitter on first, and off last.
6. Check servo operation • See page 15
Make sure the steering servos are working correctly.
7. Range test the radio system • See page 15
Follow this procedure to make sure your radio system works properly
at a distance and that there is no interference from outside sources.
8. Detail your model • See page 9
Apply other decals if desired.
9. Drive your model • See page 18
Driving tips and adjustments for your model.
10. Maintain your model • See page 25
Follow these critical steps to maintain the performance
of your model and keep it in excellent running condition.