Tq I Advanced Tuning Guide - Traxxas E-Maxx Brushless Edition 3908L Owner's Manual

TQ ADVANCED TUNING GUIDE
i
The model's TQi transmitter is equipped with the new TQi Docking Base. This
innovative accessory transforms your iPhone
tuning tool that equips your TQi with an intuitive, high-definition, full-color
graphical user interface.
Traxxas Link
The powerful Traxxas Link app (available in the Apple App Store) gives you
complete control over the operation and tuning of your Traxxas model with
stunning visuals and absolute precision. With the installed Traxxas Link
telemetry sensors on the model, Traxxas Link displays real-time data such as
speed, RPM, temperature, and battery voltage.
Intuitive iPhone and iPod touch interface
Traxxas Link makes it easy to
learn, understand, and access
powerful tuning options. Control
Drive Effects settings such as
steering and throttle sensitivity;
steering percentage; braking
strength; and throttle trim by
simply touching and dragging the
sliders on the screen.
Real-Time Telemetry
With the installed telemetry
sensors, the Traxxas Link
dashboard comes to life showing
you speed, battery voltage, RPM,
and temperature. Set threshold
warnings and log maximums,
minimums, or averages. Use the
recording function to document
your dashboard view, with sound,
so that you can keep your eyes
on your driving and not miss a
single apex.
Manage up to 30 Models with Traxxas Link
The TQi radio system automatically keeps track of what vehicles it has bound
to and what settings were used for each--up to 30 models total! Traxxas Link
provides a visual interface to name the models, customize their settings,
attach profiles, and lock them into memory. Simply choose a model and any
previously bound transmitter, power them up, and start having fun.
26 • E-MAXX
® or iPod touch ® into a powerful
Tap and slide to adjust Steering Sensitivity,
Throttle Trim, Braking Percent, and more!
The customizable Traxxas Link dashboard delivers
real-time rpm, speed, temperature, and voltage data.
Installing Your Mobile Device (Model 3908L)
The TQi Docking Base has a unique clamping mechanism that allows the
Apple ® iPhone ® and iPod touch ® to be easily installed and removed. The
clamp's self-adjusting design allows it to accommodate the wide variety of
protective cases available for Apple products. Follow these steps to install
your mobile device:
1. Swing the Docking Base Clamp lever from
position A (locked) to position B (unlocked).
2. Install your mobile device by sliding it onto
the connector.
3. Ensure your mobile device is parallel with
the Docking Base. Slide the included foam
pads beneath the mobile device so it
is held parallel with the docking base
when supported by the pads. The pads
have thicknesses of 1, 2, 3 and 4mm,
choose the best combination for your
device and case, if used. See the chart
to find the correct pad combination
for iPhone and iPod touch models
without accessory cases.
4. Make certain your mobile device slides
directly onto the connector when slid
over the foam pads. When you are
satisfied with the fit, peel the backing
from the foam pads and apply them to
the Docking Base.
5. Close the Docking Base Clamp by moving it to position A. Confirm your
mobile device is snug and securely held in place.
Optional: The Docking Base Clamp's 'fingers' have soft gripper pads on them
to hold un-cased devices. If your device is in a soft rubber case, the gripper
pads may be removed for easier device installation and removal.
Foam pad combination recommendations (without accessory cases):
iPod touch 2nd & 3rd Generation
iPod touch 4th Generation
iPhone 3GS
iPhone 4
1
A B
2
3
4mm + 3mm (7mm total)
4mm + 3mm + 2mm (9mm total)
3mm + 2mm (5mm total)
or 4mm + 1mm (5mm total)
4mm + 3mm + 1mm (8mm total)