Remote Operation
Once the receiver is switched to "REMOTE" the transmitter operates the fireplace. Once you understand
how the transmitter works, you will be able to operate your fireplace quickly and easily.
Display Overview
The transmitter display has four main sections (see
ON
MAX
MAX
Listen for the "Beep"
Each time you press a button on the transmitter that controls the fireplace, a "beep" will come from the
fireplace. When you change thermostat target settings the fireplace will not beep.
NOTE: When the receiver batteries start to get low, the receiver will beep intermittently. When the
batteries are nearly depleted, the receiver will no longer beep. See "
35).
© Travis Industries
Operation
Thermostat Display
F
AUX
).
Figure 4
Room Temperature Display
Read-Out (Thermostat Setting, Function, etc.)
Mode Display (Flame Height, Blower, Light, Comfort Control)
Receiver Batteries
4120301
31
Figure 4
" on page
100-01286_000