TL-PS110P
Single Parallel Port Fast Ethernet Print Server
Figure 4-9
Use DHCP/BOOTP: This option allows you to select DHCP/ BOOTP option. If there is a
DHCP/BOOTP server on your network. This option allows the print server to obtain IP-related
settings automatically from your DHCP server.
IP Address: This option allows you to input IP address from the print server. The IP address
must meet the IP addressing requirements of the network segment.
Note:
On the TCP/IP Setup screen, specify a fixed IP address is highly recommended.
Subnet Mask: This option allows you to input subnet mask from the print server. The IP
address must meet the IP addressing requirements of the network segment.
Default Gateway: This option allows you to input gateway from the print server. This IP
address of gateway must meet the router or gateway to go across of the network segment.
Rendezvous Settings: Enable/Disable the Rendezvous(Bonjour) support for Apple Mac OS
X 10.2 or higher.
45