Activating the DNR (Digital Noise Reduction)
If the receiving signal is weak and the picture is blurry, the
picture may be improved when using this function.
1�
From the Picture menu, press s or r to select DNR
then press
.
2�
Presss or r to select an item you want to adjust, pressv
or w to adjust the settings as required.
Note:
In the PC input mode, this mode is not available.
Selecting the color temperature
You can change the tone of the picture by selecting from three
preset color temperatures: Cool, Normal or Warm.
1�
From the Picture menu, press s or r to select Color
Temp then press
.
2�
Press v or w to select mode you prefer.
Cool:
Lends a blue hue to the picture.
Normal: Neutral
Warm:
Lends a red hue to the picture.
Using the active backlight control
In order to improve screen visibility, the active backlight
control sets the screen brightness automatically during dark
scenes.
1�
From the Picture menu, press s or r to select
Backlight then press
2�
Press v or w to select Off or On.
0
Using the TV's features (General)
.
3�
If you want to adjust Backlight manually, turn Active
Backlight Control to Off, then press s.
4�
Press v or w to adjust the settings as required.
Using the cinema mode
A movie film's picture runs at 24 frames a second, whereas
movie software such as DVD, etc., that you enjoy watching on
television at home runs at 30 (NTSC) or 25 (PAL) frames a
second. To convert this signal to reproduce a smooth motion
and picture quality, select the On mode.
Effective signal and setup conditions:
When the Video input mode is selected.
•
When the input signal format is 480i and 576i signals.
•
1�
, then press v or w to display the PICTURE
Press
menu then press
.
2�
Press s or r to select Cinema Mode then press
3�
Press v or w to turn On or Off.
Note:
When a DVD movie with subtitle is playing back, this mode
may not work correctly.
Cinema Mode only support to
input sources.
.
1,
2, HDMI 1 and HDMI 2