4�
Press w into the Timer data position and press s and r
to set the time period.
5�
Press
to start the timer.
Notes:
After power code unplug/plug, the
default.
Setting the Power Control
1�
, then v or w to display the Timer menu, then
Press
press
.
2�
Press s or r to select Power Control, then press
Press s or r to select which you want adjust, then press
3�
v or w to set function.
A.
No Operation Off can be set Disable or 1 to 6 hours.
B.
No Signal Off can be set Disable or 5 to 45 minutes.
Notes:
If you set No Operation Off for 1~6 hours, it will
•
automatically power off when you do not do any
operation.
If you set No Signal Off for 5~45 minutes, it will
•
automatically power off when input has no signal.
function (No Signal Off) will work only
•
Power Control
on the ATV,
1,
2, PC, HDMI and DTV sources.
Setting the Banner Duration
1�
, then v or w to display the TIMER menu, then
Press
press
.
2�
Press sor r to select Banner Duration, then press
Press v or w to set Banner Duration which can be set
3�
1 to 12 seconds.
Using the TV's features (General)
setting change to
Timer
.
- digital / analog -
.
Notes:
Banner Duration function is setting on-screen information
•
display timing.
On-Screen-Display will remain about 1 minute.
•
Selecting the video input source to
view
1�
Press
on the remote control to display the video input
mode list, then presss or r to select appropriate input
source. You may also press
mode.
2�
Press
.
DTV (Digital TV)
1 (CVBS input or component video input)
(
page 27)
2 (CVBS input or S-video input)
HDMI 1, HDMI 2 (HDMI input)
PC (PC input)
ATV (Analog TV)
to display the video input
(
page 27)