Activating The Black Stretch; Activating The Mpeg Nr (Noise Reduction); Activating The Dnr (Digital Noise Reduction); Selecting The Color Temperature - Toshiba 42WL68A Owner's Manual

Activating the black stretch

This function increases the strength of dark areas of the picture
which improves definition.
1 Press M, then press Y or y to display the PICTURE
menu.
PICTURE
Picture settings
Color management
Base color adjustment
Active Backlight Control
Cinema mode
meta brain PRO 100
MENU Back EXIT
2
Press < or > to select the Picture settings menu,
then press Q.
3
Press < or > to select Black stretch on the 2nd page.
Picture settings
Black stretch
MPEG NR
DNR
Color Temperature
MENU EXIT
Back
4
Press Y or y to select On or Off.
Black stretch
Note:
In the PC input mode (- page 20), this mode is not available.

Activating the MPEG NR (Noise Reduction)

If the receiving signal of MPEG is a mosquito (grained) noise
depending on the compression and conversion, the noise may
be reduced when using this function.
1
From the Picture settings menu, press < or > to
select MPEG NR on the 2nd page.
2
Press Y or y to select Off, Low, Middle or High.
MPEG NR
Note:
In the PC input mode (- page 20), this mode is not available.
Activating the DNR (Digital Noise
Reduction)
If the receiving signal is weak and the picture is blurry, the
picture may be improved when using this function.
1
From the Picture settings menu, press < or > to
select DNR on the 2nd page.
2
Press Y or y to select Auto, Off, Low, Middle, or High.
DNR

Selecting the color temperature

You can change the tone of the picture by selecting from three
preset color temperatures: Cool, Normal or Warm.
1
From the Picture settings menu, press < or > to
select Color Temperature on the 2nd page.
16
Using the TV's features
OK
Off
On
On
On
Watch TV
2/2
On
Low
Auto
Cool
Watch TV
On
High
Auto
2
Press Y or y to select mode you prefer.
Color Temperature
Cool: Lends a blue hue to the picture.
Normal: Neutral
Warm: Lends a red hue to the picture.

Adjusting the color management

You can adjust the picture color quality by selecting from 6
base color adjustments : Red, Green, Blue, Yellow,
Magenta or Cyan.
1
From the PICTURE menu, press < or > to select
Color management.
2
Press Y or y, then press < or > to select On.
Color management
3
Press Q, then press < or > to select Base color
adjustment.
4
Press Q, then press < or > to select an item you want
to adjust.
5
Press y, then press Y or y to select Hue or Saturation.
Base color adjustment
Red
Green
Blue
Yellow
Magenta
Cyan
Reset
MENU Back EXIT
6
Press < or > to adjust the settings as required.
Hue
0
Red
Notes:
• If you select color management Off mode, this mode is not
available.
• In the PC input mode (- page 20), this mode is not
available.

Resetting the base color adjustment

The Reset function adjusts the base color adjustment to the
factory settings.
1
From the Base color adjustment menu, press < or
> to select Reset.
2
Press Q.

Using the active backlight control

In order to improve screen visibility, the active backlight
control sets the screen brightness automatically during dark
scenes.
1
From the PICTURE menu, press < or > to select
Active Backlight Control.
2
Press Y or y to select On or Off.
Cool
On
Hue Saturation
0 0
0 0
0 0
0 0
0 0
0 0
OK
Watch TV
Saturation
0