Step 10. Operating Your Thermostat - Honeywell 36 Owner's Manual

Clearing Program Period
NOTE: Your thermostat must be in the
program mode to use the clear
feature.
Daytime
Press ,
Morning
Press until the desired day is
Day
displayed. Press and hold
until the start time and temperature
Night
setting is cleared (approximately
3 seconds).
NOTE: Morning cannot be cleared.
Repeat the above steps for all the periods to
be cleared then press
Evening Night
, or
,
Evening
Daytime
Run
.
Program
STEP 10. OPERATING
YOUR THERMOSTAT
Setting Temporary Temperatures
.
Changing Temperature Setting Until The Next
Program Period
or
Press
temperature setpoint is displayed.
NOTE: Your temporary temperature setting
is displayed for approximately
3 seconds. The setting is canceled
when the next period starts or when
24
or key until the desired
Run is pressed.
Program
69-0939—1