Honeywell 36 Owner's Manual page 22

Setting the Current Day and Time
Press and release
the current day is displayed. (Sun = Sunday,
Mon = Monday, Tue = Tuesday, Wed =
Wednesday, Thu = Thursday, Fri = Friday, Sat
= Saturday.)
NOTE: On initial power up, 1:00 pm flashes
on the display until you press a key.
Time
Press until the current time is displayed.
Set Current
(Tapping the
Day/Time
one hour increments.)
NOTE: If the current time is Daylight Savings
Time, press
displayed.
Run
Press .
Program
Set Current
then
Day
Day/Time
will advance the time in
Daylight
until DST is
Time
IMPORTANT
until
Programming the First Day
Start by programming the Morning time and
temperature for any one day:
Press and release
the desired day is displayed. Press
keys until the desired Morning time is
displayed. (The program times are in fifteen
minute intervals. Example: 8:00, 8:15, 8:30.)
Press
Morning temperature is displayed.
22
Always press the keys with your
fingertip or similar blunt tool. Sharp
instruments like pens and pencil
points can damage the touchpad.
then
Morning
or key until the desired
until
Day
Time
69-0939—1