Top View - Fisher-Price 73528 Instruction Sheet

Front Wheel Assembly
Fork Cover
6
Pedal Axle
• Place the front wheel assembly between the fork arms so that the
pedal axle fits into the groove at the bottom of each fork arm.
• Place a fork cover over the pedal axle on one fork arm.
• Insert two #10 x ¾" (1,9 cm) screws into the fork cover and
tighten.
• Repeat this procedure to attach the other fork cover to the other
fork arm, using the #10 x ¾" (1,9 cm) screws.
Fork Covers
7
• Turn the frame upright.
• Insert the fork post up through the hole in the frame neck.
Make sure the fork is positioned so that the fork covers face the
rear wheels.
• Place the handlebar over the fork post and push it down onto the
frame. Make sure the handlebar is positioned so that the screw
hole faces the rear wheels and aligns with the screw hole in the
fork post.
• Insert the #8 x 3" (7,6 cm) screw through the hole in the
handlebar and into the fork post so that part of the screw (about
¾" - 1,9 cm) is still visible. Tighten the screw.
Fork Arms
Groove
Handlebar
Frame Neck
Fork Post
FIRST, insert the screw so
that ¾" (1,9 cm) is visible.
THEN, tighten the screw.
¾ " (1,9 cm)
Assembly
8
• Insert the knobbed end of the footrest up through the opening in
the underside, center of the frame
• Rotate the footrest ¼ turn
• Slide the footrest toward the handlebar as far as it will go until
the top of the footrest is positioned over the opening's
rectangular cut-out.
• Lower the knobbed end of the footrest into the rectangular cut-out
in the frame
9
• Place the frame cover over the frame opening. Make sure the
holes in the frame cover align with the holes on the frame.
• Insert three #10 x ¾" (1,9 cm) screws into the frame cover
and tighten.
Seat Mount
10
• Place the seat on the seat mount.
• Adjust the seat for your child's comfort by aligning the hole in the
seat with one of the seat mount adjustment holes.
5
Knobbed End
Frame Opening
Footrest
.
.
.
Frame Cover
Seat
Seat Mount Adjustment Holes
Footrest
Knobbed End

TOP VIEW