TM
Front
Do not power on HD-100 unit until Display(s) and Camera are fully connected
and powered on.
1.
Connect Power cable.
2.
Connect Ethernet cable to ETH-O and to your network.
3.
Connect to TV using HDMI to HDMI cable on
HDMI-to-TV.
nOTE: A second screen can be connected to the VGA port
(2
display is for Data Share viewing only).
nd
Connecting your VidyoRoom for your HD-100 System
HDMI
3.
Primary Display
5.
5.
Audio Device
Audio Device
Chat 50
OR
yamaha PJP-25UR
Use only one audio device
between the above two
VGA2USB (optional)
USB port
11
Initial VidyoRoom Setup for HD-100 Rev. B
CAMERA
Back
4.
Connect Sony EVI-HD3V camera:
* For video connection use HDMI/DVI cable
* For Camera Control connection:
a.
Connect VISCA cable to camera
b.
Connect VISCA cable to USB/Serial DB9 cable
c.
Connect USB/Serial DB9 cable to the CAMCTRL port on
the unit
TM
5.
Connect USB SpeakerPhone cable to an available
USB port.
3.
Secondary Display
(For Data Share viewing only)
D89-COnnECTIOn
4b.
USB TO SERIAL
4c.
VISCA
4a.
2.
Ethernet
4.
4.
Video Device
Video Device
HDMI/DVI
Sony EVI-HD3V
Sony EVI-HD3V
1.
Power