Image IMTL12900 User Manual page 22

THE INFORMATION MODE/DEMO MODE
The console features an information mode that keeps
track of the total number of hours that the treadmill has
been operated and the total number of miles that the
walking belt has moved. The information mode also
allows you to switch the console from miles per hour to
kilometers per hour. In addition, the information mode
allows you to turn on and turn off the demo mode.
To select the information mode, hold down the Stop
button while inserting the key into the console. When
the information mode is selected, the following informa-
tion will be shown:
The Distance/Incline/Laps
display will show the total
number of miles that the
walking belt has moved.
An "E," for English miles,
or an "M," for metric kilo-
meters, will appear in the
Speed/ Minutes-Mile dis-
play. Press the Speed
button to change the unit
of measurement.
The Time/Segment Time
display will show the total
number of hours the tread-
mill has been used.
IMPORTANT: The
Calories/Fat Calories dis-
play should be blank. If a
"d" appears in the display,
the console is in the
"demo" mode. This mode
is intended to be used only when a treadmill is dis-
played in a store. When the console is in the demo
mode, the power cord can be plugged in, the key can
be removed from the console, and the displays and in-
dicators on the console will automatically light in a pre-
set sequence, although the buttons on the console will
not operate. If a "d" appears in the Calories/Fat
Calories display when the information mode is se-
lected, press the Speed
Fat Calories display is blank.
To exit the information mode, remove the key from the
console.
button so the Calories/
OPTIONAL HAND WEIGHTS
Hand weights let you
exercise your upper-
body while you walk on
the treadmill. The hand
weights fit into conve-
nient holders in the
console. To purchase
hand weights, call
toll-free 1-800-772-
0257.
22