Advertisement
9
• "Snap" the news stand into the top side of the base.
10
• To attach the post,
turn the base over
so the bottom is facing you.
• Align the holes in the post with the pegs, as shown.
1
/
"
• Insert two
screws into the post and tighten.
2
• Turn the base upright.
Assembly
News Stand
Post
Pegs
Bottom View
11
• "Snap" the gate into the slots on the top side of the base.
12
• "Snap" the vacuum into the base.
5
Gate
Vacuum
Advertisement
